Injin Zana Laser, Tsaftacewa, Welding da Alama
Samu zance
Kayayyaki
Nau'in ɗigon ɗigo na hannu mai gano alamar Chassis Lamba mai alamar pneumatic
Amfanin samfurori
1.Mai sarrafa taɓawa inch 7 da mai sarrafa PC na iya zama na zaɓi.
2.Ƙaƙƙarfan ƙira, ƙira mai ɗaukar nauyi, dacewa don ɗauka a cikin fita.
3.Factory mai sarrafa kansa mai alamar alama tare da babban taurin HRC60 na iya yin alama mai zurfi 0.1 ~ 1mm.
4.nau'ikan haruffa 100, suna iya keɓancewa gwargwadon lambar VIN ɗin ku.
5.Garanti na shekaru 2, kulawar rayuwa kyauta.
Siga
| abu | darajar |
| Saurin yin alama | 2-5 haruffa (2x2mm)/s |
| Mitar bugun jini | sau 300/s |
| Zurfin alamar alama | 0.01 zuwa 1mm (Bambanta da kayan) |
| Alamar abun ciki | Bayanin Alphanumeric, Data Matrix ko Dot Matrix 2D lambobin,Lambobin Shift, Barcode, Serial Number, Kwanan wata, Lambar VIN, Lokaci,Harafi, Hoto, Logo, Graphics da sauransu. |
| Stylus Pin Hardness | HRA92/HRA93 |
| Wurin yin alama | 80x40mm, 130x30mm,140x80mm,200x200mm |
| Girma | 140x20x240mm |
| Kayayyakin alama | kasa HRC60 karfe da nonmetallic kayan,sama da HRC60 yana buƙatar salo na musamman |
| Maimaita daidaito | 0.02-0.04mm |
| Ƙarfi | 300W |
| Wutar lantarki | AC 110V 60HZ ko AC220V 50HZ |
| Air Compressed (Pneumatic Air) | 0.2-0.6Mpa |
| Haɗin kai | USB da kuma RS-232 |
| Mai sarrafawa | Mai sarrafa PC |
| Nau'in wutar lantarki | Cutar huhu |
| Hanyar yin alama | sama, ƙasa, hagu, dama, da alamar farfajiyar madauwari |
Samfuran alamar alama
Don me za mu zabe mu?
1.Mai hankali da šaukuwa, mai sauƙin ɗauka don aiki akan manyan sassa kamar Firam ɗin Automotive
2.Zaɓuɓɓuka masu yawa don fonts, masu goyan bayan rubutun gyara
3.Zurfin alamar ana iya daidaita shi ta hanyar sarrafa fil ɗin alama
4.Ingancin kwanciyar hankali kuma yana iya ci gaba da aiki har tsawon yini
5.Tsarin sassauƙa na nau'ikan alama daban-daban
6.Babban gudun aiki, barga mai dorewa
7.Layin goyan baya da alamar digo
8.Za a iya keɓancewa bisa ga buƙatun abokan ciniki.
